IC Archives -

W9812G6KH-6

admin — Wed, 19 Jun 2024 15:09:13 +0000

The W9812G6KH is a 128M SDRAM and speed involving -5/-5I, -6/-6I and -75

Density	128Mb	Industrial & Commercial Status	Mass Production
Vcc	3.3V±0.3V	Frequency	166 / 200Mbps
Package	TSOP II 54	Temperature Range	C-temp, I-temp/ Automotive
Feature List	The W9812G6KH is a 128M SDRAM and speed involving -5/-5I, -6/-6I and -75

The post W9812G6KH-6 appeared first on .

RP2040

admin — Thu, 22 Feb 2024 11:44:00 +0000

High performance. Low cost. Small package.

Flexible I/O connects RP2040 to the physical world by allowing it to speak to almost any external device. High performance breezes through integer workloads. Low cost helps ease the barrier to entry.

This isn’t just a powerful chip: it’s designed to help you bring every last drop of that power to bear. With six independent banks of RAM, and a fully connected switch at the heart of its bus fabric, you can easily arrange for the cores and DMA engines to run in parallel without contention.

RP2040 builds Raspberry Pi’s commitment to inexpensive, efficient computing into a small and powerful 7 mm × 7 mm package, with just two square millimetres of 40 nm silicon.

The post RP2040 appeared first on .

Realtek Semiconductor RTL8196E VE3-CG

admin — Wed, 21 Feb 2024 07:14:12 +0000

The RTL8196C is an integrated System-on-a-Chip (SoC) Application Specific Integrated Circuit (ASIC) that implements a basic L2 5-port Ethernet switch and a high performance CPU. The embedded RISC CPU is an RLX4181, and the clock rate can be up to 400MHz. To improve computational performance, a 16-Kbyte I-Cache, 8-Kbyte D-Cache, 16-K I-MEM, and 8-Kbyte D-MEM are provided. A standard 5-signal P1149.1 compliant EJTAG test interface is supported for CPU testing and software development.

The post Realtek Semiconductor RTL8196E VE3-CG appeared first on .

LPC54114J256BD64 NXP

admin — Mon, 22 Jan 2024 07:40:51 +0000

Operating Features

Parameter	Value
Operating Frequency [Max] (MHz)	150
Flash (kB)	256
GPIO	50
USB Controllers	1
ADC sample rate	4.8 Msps
UART	8
I²C	8

Parameter	Value
SPI	8
ADC (Channels)	1
ADC (bits)	12
SCTimer / PWM	1
Supply Voltage [min] (V)	1.62
Supply Voltage [max] (V)	3.6
Product category	194-LPC54100-

The post LPC54114J256BD64 NXP appeared first on .

Nordic Semiconductor nRF52840

admin — Thu, 04 Jan 2024 10:33:37 +0000

The nRF52840 SoC is the most advanced member of the nRF52 Series. It meets the challenges of sophisticated applications that need protocol concurrency and a rich and varied set of peripherals and features. It offers generous memory availability for both Flash and RAM, which are prerequisites for such demanding applications.

The nRF52840 is fully multiprotocol capable with full protocol concurrency. It has protocol support for Bluetooth LE, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary stacks.

The nRF52840 is built around the 32-bit ARM® Cortex™-M4 CPU with floating point unit running at 64 MHz. It has NFC-A Tag for use in simplified pairing and payment solutions. The ARM TrustZone® CryptoCell cryptographic unit is included on-chip and brings an extensive range of cryptographic options that execute highly efficiently independent of the CPU. It has numerous digital peripherals and interfaces such as high speed SPI and QSPI for interfacing to external flash and displays, PDM and I²S for digital microphones and audio, and a full speed USB device for data transfer and power supply for battery recharging.

Exceptionally low energy consumption is achieved using a sophisticated on-chip adaptive power management system.

SoC	nRF5340	nRF52840	nRF52833	nRF52832	nRF52820	nRF52811	nRF52810	nRF52805
Bluetooth	5.4	5.4	5.4	5.4	5.4	5.4	5.4	5.4
Thread	Yes	Yes	Yes		Yes	Yes
Matter	Yes	Yes
Zigbee	Yes	Yes	Yes		Yes
Bluetooth Mesh	Yes	Yes	Yes	Yes	Yes
Flash	1 MB + 256 KB	1 MB	512 KB	512/256 KB	256 KB	192 KB	192 KB	192 KB
RAM	512 KB + 64 KB	256 KB	128 KB	64/32 KB	32 KB	24 KB	24 KB	24 KB
CPU	128 MHz Arm Cortex-M33 + 64 MHz Arm Cortex-M33	64 MHz Arm Cortex-M4 with FPU	64 MHz Arm Cortex-M4 with FPU	64 MHz Arm Cortex-M4 with FPU	64 MHz Arm Cortex-M4	64 MHz Arm Cortex-M4	64 MHz Arm Cortex-M4	64 MHz Arm Cortex-M4
High-Speed SPI	Yes	Yes	Yes
QSPI	Yes	Yes
USB	Yes	Yes	Yes		Yes
PWM, PDM, I2S	Yes	Yes	Yes	Yes		PWM, PDM	PWM, PDM
ADC, Comp	Yes	Yes	Yes	Yes	COMP	ADC, COMP	ADC, COMP	ADC
Temp Range	-40 to 105 °C	-40 to 85 °C	-40 to 105 °C	-40 to 85 °C	-40 to 105 °C	-40 to 85 °C	-40 to 85 °C	-40 to 85 °C
Supply voltage range	1.7 to 5.5 V	1.7 to 5.5 V	1.7 to 5.5 V	1.7 to 3.6 V	1.7 to 5.5 V	1.7 to 3.6 V	1.7 to 3.6 V	1.7 to 3.6 V
Packages	aQFN94 WLCSP95	aQFN73 WLCSP94	aQFN73 QFN40 WLCSP76	QFN48 WLCSP50	QFN40	QFN48 QFN32 WLCSP33	QFN48 QFN32 WLCSP33	WLCSP28
GPIOs	48	48	18-42	32	18	15-32	15-32	10

The post Nordic Semiconductor nRF52840 appeared first on .

Infineon XMC4500F100K1024ACXQSA1

admin — Tue, 02 Jan 2024 07:49:32 +0000

Product Attribute	Attribute Value
Manufacturer:	Infineon
Product Category:	ARM Microcontrollers – MCU
RoHS:	Details
Series:	XMC4500
Mounting Style:	SMD/SMT
Package / Case:	LQFP-100
Core:	ARM Cortex M4
Program Memory Size:	1 MB
Data Bus Width:	32 bit/16 bit
ADC Resolution:	12 bit
Maximum Clock Frequency:	120 MHz
Number of I/Os:	55 I/O
Data RAM Size:	160 kB
Supply Voltage – Min:	1.3 V
Supply Voltage – Max:	1.3 V
Minimum Operating Temperature:	– 40 C
Maximum Operating Temperature:	+ 85 C
Packaging:	Tray
Analog Supply Voltage:	3.3 V
Brand:	Infineon Technologies
Data RAM Type:	SRAM
Data ROM Size:	16 kB
Data ROM Type:	ROM
I/O Voltage:	3.3 V
Interface Type:	CAN, Ethernet, I2C, I2S, LIN, SDMMC, SPI, UART, USB
Moisture Sensitive:	Yes
Number of ADC Channels:	24 Channel
Processor Series:	XMC4000
Product Type:	ARM Microcontrollers – MCU
Program Memory Type:	Flash
	90
Subcategory:	Microcontrollers – MCU
Tradename:	XMC
Part # Aliases:	XMC4500-F100K1024 AC SP001093080
Unit Weight:	0.046530 oz

The post Infineon XMC4500F100K1024ACXQSA1 appeared first on .

Nuvoton M487JIDAE

admin — Tue, 26 Dec 2023 08:18:44 +0000

The M487JIDAE is a high performance, low power microcontroller powered by the Arm^® Cortex^®-M4F core with DSP extension. It can run up to 192 MHz with 175 µA/MHz dynamic low power consumption. The 512 KB embedded dual bank Flash memory supports OTA (Over-The-Air) firmware upgrade, and the 160 KB embedded SRAM includes 32 KB cache to speed up external SPI Flash code execution. The factory pre-loaded bootloader delivers Secure Boot functionality to provide the code integrity check in embedded Flash memory. The built-in Secure Protection ROM provides a safe space for saving confidential program or data. One-Time Programmable ROM is also included for product life-cycle management.

The M487JIDAE supports operating voltage from 1.8V to 3.6V, and industrial operating temperature from -40°C to 105°C. It is equipped with 10/100 Mbps Ethernet MAC with RMII and hardware cryptography engine. Package type is LQFP144.

Target Application:
Industrial IoT, Smart Home, IoT Gateway, Serial-to-Ethernet Converter, etc.

Key Features:

•	Core
	–	Up to 192 MHz Arm® Cortex ®-M4F delivering 1.25 DMIPS per MHz
	–	DSP instruction set
	–	Memory Protection Unit (MPU)

•	Memory
	–	512 KB zero-wait state Flash memory
	–	160 KB RAM, including 32 KB external SPI Flash cache
	–	4 KB Secure Protection ROM
	–	2 KB One-Time-Programmable ROM

•	Cyclic Redundancy Calculation Unit

•	16-ch Peripheral DMA Controller

•	External Bus Interface
	–	LCD parallel interface, i80 mode

•	Clocks
	–	4 to 24 MHz crystal oscillator
	–	32 kHz oscillator for RTC
	–	Internal 12 MHz RC oscillator
	–	Internal 10 kHz RC oscillator
	–	Internal PLL up to 480 MHz

•	RTC
	–	80 bytes of battery-powered backup registers

•	Timer & PWM
	–	Four 32-bit timers
	–	Twelve Enhanced PWM with twelve 16-bit timers
	–	Twelve Basic PWM with two 16-bit timers
	–	One 24-bit count-down SysTick timer
	–	One watchdog timer
	–	One window watchdog timer

•	Cryptography Accelerator
	–	ECC (P-521, B-571, K-571)
	–	AES-128, 192, 256
	–	DES/ 3DES
	–	SHA-160, 224, 256, 384, 512
	–	HMAC
	–	Random number generator

•	Analog Peripheral
	–	One 12-bit, up to 16-ch 5MSPS SAR ADC
	–	Two 12-bit, 1 MSPS DAC
	–	Two rail-to-rail comparators
	–	Three operational amplifiers

•	Communication Interface
	–	Up to 6 low power UART interfaces (17 Mbps), including 2 LIN interfaces
	–	Up to 3 ISO-7816 interfaces (3.4 MHz), supporting full duplex UART mode
	–	Three I²C interfaces (Up to 3.4 Mbps)
	–	One SPI Flash interface (Up to 96 MHz) supports quad mode
	–	One Quad-SPI interface (Up to 96 MHz)
	–	Up to 4 SPI/ I²S interfaces (SPI up to 96 MHz, I²S up to 192 kHz/16-bit)
	–	One I²S interface (192 kHz/32-bit)
	–	Two USCI interfaces, supporting configurable UART/ SPI/ I²C
	–	Two CAN 2.0B interfaces
	–	Two Secure Digital Host Controllers (50 MHz)

•	Control Interface
	–	Two quadrature encoder interfaces
	–	Two 24-bit, 3-ch input capture timer/counter units

•	Advanced Connectivity
	–	USB 2.0 high speed device/ host/ OTG controller with on-chip PHY
	–	USB 2.0 full speed device/ host/ OTG controller with on-chip PHY
	–	10/100 Mbps Ethernet MAC with RMII

•	Operating Characteristic
	–	Voltage range: 1.8V to 3.6V
	–	Temperature range: -40°C to +105°C

The post Nuvoton M487JIDAE appeared first on .

Huada Semiconductor HC32F4A0SITB

admin — Mon, 25 Dec 2023 20:04:12 +0000

⚫ ARMv7-M architecture 32bit Cortex-M4 CPU, integrated FPU, MPU, DSP supporting SIMD instructions, full instruction tracking unit ETM, and CoreSight standard debugging unit. The highest operating frequency is 240MHz, reaching a computing performance of 300DMIPS or 825Coremarks

⚫ Built-in memory

– Maximum 2048KByte dual bank Flash memory

– Maximum 516KByte SRAM, including 128KByte single-cycle access high-speed RAM

⚫ Power, clock, reset management

– System power supply (Vcc): 1.8-3.6V

– 6 independent clock sources: external main clock crystal oscillator (4-24MHz), external secondary crystal oscillator (32.768kHz), internal high-speed RC 16/20MHz), internal medium-speed RC (8MHz), internal low-speed RC (32kHz), internal WDT Dedicated RC (10kHz)

– 15 reset sources including power-on reset (POR), low voltage detection reset (PVD1R/PVD2R), port reset (NRST), each reset source has an independent flag bit

⚫ Low power consumption operation

– Peripheral functions can be turned off or on independently

– Three low power consumption modes: Sleep, Stop, Power down mode

– VBAT independent power supply supports ultra-low power consumption RT, 128Byte backup register, 4KByte backup SRAM

⚫ Peripheral operation support system significantly reduces CPU processing load

– 16-channel dual host DMAC

– USBHS USBFS Ethernet MAC dedicated DMAC

– 8 Data Computing Units (DCU)

– Math co-processing unit (MAU), supports Sin/Sqrt

– Supports 16th-order FIR digital filter (FMAC)

– Support mutual triggering of peripheral events (AOS)

⚫ High performance simulation

– 3 independent 12bit 2.5MSPS ADCs

– 3 simultaneous sampling and holding circuits realize 3-channel simultaneous sampling

– 4 independent 12bit 15MSPS DACs

– 4 Programmable Gain Amplifiers (PGA)

– 4 independent voltage comparators (CMP)

– 1 On-chip Temperature Sensor (OTS)

⚫ Timer

– 8 multi-function 32/16bit PWM Timer (Timer6)

– 16 50ps high-resolution PWM (HRPWM)

– 3 16bit motor PWM Timers (Timer4)

– 12 16bit universal timers (TimerA)

– 4 16bit universal Timers (Timer2)

– 2 16bit basic Timers (Timer0)

– Real-time clock Timer RTC

– 2 WDTs, supporting internal dedicated clock

⚫ Maximum 142 GPIOs

– Maximum 134 5V-tolerant IOs

⚫ Maximum 32 communication interfaces

– 10 USARTs, supporting ISO7816-3 protocol

– 6 SPI

– 6 I2C, support SMBus protocol

– 4 I2S, built-in audio PLL

– 2 SDIO, support SD/MMC/eMMC format

– 1 QSPI supports 240Mbps high-speed access to XIP

– 2 CAN support CAN2.0B, up to CAN FD

– 2 USB 2.0, supporting HS FS respectively, built-in FS-PHY, supporting Device/Host

– 1 10/100M Ethernet MAC supports dedicated DMA

IEEE 1588-2018 PTP MII/RMII interface

⚫ External memory controller EXMC

– Support static Memory controller

– Support dynamic Memory controller

⚫ Data encryption function

– AES/HASH (SHA256/HMAC)/TRNG

⚫ Packaging form:

LQFP176 24×24mm LQFP144 20×20mm

LQFP100 14×14mm VFBGA176 10×10mm

TFBGA208 13×13mm

The post Huada Semiconductor HC32F4A0SITB appeared first on .

Renesas R7FA6M4AF3CFB

admin — Mon, 25 Dec 2023 20:00:59 +0000

The Renesas RA6M4 group of microcontrollers (MCUs) uses the high-performance Arm® Cortex®-M33 core with TrustZone. In concert with the Secure Crypto Engine it offers Secure Element functionality. The integrated Ethernet MAC with individual DMA ensures high data throughput. The RA6M4 is built on a highly efficient 40nm process and is supported by an open and flexible ecosystem concept—the Flexible Software Package (FSP), built on FreeRTOS—and is expandable to use other RTOSes and middleware. The RA6M4 is suitable for IoT applications requiring Ethernet, future proof security, large embedded RAM, and low active power consumption down to 99uA/MHz running the CoreMark® algorithm from Flash.

200MHz Arm® Cortex®-M33 with TrustZone®
Secure element functionality
512kB – 1MB Flash memory and 192kB SRAM with Parity and 64kB SRAM with ECC
Dual-bank-Flash with background operation
8kB Data Flash to store data as in EEPROM
Scalable from 64-pin to 144-pin packages
Ethernet controller with DMA
Capacitive touch sensing unit
USB 2.0 Full Speed
CAN 2.0B
QuadSPI and OctaSPI
SCI (UART, Simple SPI, Simple I²C)
SPI/ I²C multimaster interface
SDHI and MMC

The post Renesas R7FA6M4AF3CFB appeared first on .

ICE40HX1K Lattice Semiconductor

admin — Wed, 15 Nov 2023 07:58:09 +0000

Compliant

3A991d.1.

Active

8542.39.00.01

Automotive

PPAP

iCE40 HX

40nm

107

1.2

3520

SRAM

3520

Yes

1.14

1.26

1.2|1.5|1.8|2.5|3.3

-40

100

Tray

iCE40

Mounting

Surface Mount

Package Height

1.4

Package Width

Package Length

PCB changed

144

Standard Package Name

QFP

Supplier Package

TQFP

144

Lead Shape

Gull-wing

The post ICE40HX1K Lattice Semiconductor appeared first on .